This Phone Setting Is Draining Your Battery All Day

Trending Now

You plugged it in overnight and woke up at 100 percent. Since then you checked the weather, answered a dozen texts, and watched one video while the coffee brewed. It is 1 p.m., you are sitting at 38 percent, and the phone feels warm in your pocket for no reason you can point to.

The battery is probably fine. The problem is the list of apps you gave standing permission to know where you are. That single permission, the one set to “Always” instead of “While Using the App,” is the most expensive switch on most phones, and almost nobody goes back to check it after tapping Allow on install day.

Change Always To While Using The App

Location is one of the hungriest system features on a phone, because it does not just use GPS. It pulls from GPS satellites, Wi-Fi, Bluetooth, nearby cell towers and the phone’s own motion sensors to pin you down. One estimate puts heavy GPS use at roughly 13 to 38 percent more drain than normal, and the range is that wide because signal strength decides it. In a tunnel, a basement or out on a rural road, the radio works harder and burns more.

On iPhone, go to Settings, then Privacy & Security, then Location Services. Tap each app in the list and switch Always to While Using the App, or Never for the ones that have no business asking. Then scroll to the bottom, tap System Services, find Significant Locations and toggle it off. Leave Find My and Emergency Calls & SOS alone so the phone can still be located if you lose it.

On Android, open Settings, tap Location, then App permissions. Work down the list and set anything that is not Maps to “Allow only while using the app.” The faster version: open Location, tap the group labeled apps that can always access location, and fix everything sitting in there. Your shopping apps, your delivery apps and your social apps do not need to know where you are while they are closed. They work exactly the same when you open them.

Kill Precise Location For Apps That Do Not Need It

There is a second switch hiding under each app’s location permission, and it matters almost as much as the first. Precise Location tells the app to use the actual GPS chip. Switch it off and the app falls back on cell tower and Wi-Fi triangulation, which puts you in the right neighborhood instead of the right parking space.

A weather app does not need your exact street corner. Neither does a news app serving local headlines, a coupon app looking for your nearest store, or any app that just wants to tag a post. Turn Precise off for those and leave it on for navigation and rideshare. On iPhone it is a toggle inside each app’s entry under Location Services. On Android it sits on the same screen where you set the permission level.

Restrict Background Activity On Apps You Open Twice A Year

Most apps you install are allowed some background activity by default. That means the photo editor you used once, the three games you abandoned in February and the shipping app you downloaded to track a package are all waking the phone up to refresh themselves right now. One tech writer went through his own list, set roughly 35 apps to Restricted, and picked up over an hour of screen-on time by the next afternoon.

On Android, go to Settings, Apps, pick an app, tap Battery or Power, and choose Restricted. On a Samsung you can also turn on the sleeping apps feature so the phone handles it for you. On iPhone, go to Settings, General, Background App Refresh, and either switch it off entirely or set it to Wi-Fi only, then flip off the individual apps you do not care about.

Leave your messaging apps, email and anything you rely on for real-time alerts unrestricted. Restricting those is how you end up getting a text four hours late and blaming your carrier. That makes this five-minute cleanup the best return on time of anything in this article.

Turn Off Always-On Display, Or At Least Tame It

The clock glowing on your locked screen is costing you more than it looks like it should. Testing by PhoneArena on an iPhone 14 Pro measured 6 percent battery used over just 8 hours of standby with the display on, roughly three quarters of a percent an hour. Samsung puts its own figure under 1 percent per hour. A phone that sits face-up on a desk for 16 hours a day is losing 12 to 16 percent to a clock you could read off the microwave.

On iPhones with an always-on screen, from the 14 Pro on and the iPhone 17, go to Settings, Display & Brightness, Always On Display, and toggle it off. If you want to keep it, switching off Show Wallpaper and Show Notifications cuts what the screen keeps lit. On Samsung, it is Settings, Lock screen, Always On Display, where you can either kill it or set it to show only when a notification arrives. That middle setting roughly halves what it costs you.

Turning it off is good for 10 to 15 percent of standby battery. Try it for a week. Most people stop missing it by day two, and Raise to Wake covers the gap anyway.

Your Screen Is Your Biggest Drain

The display accounts for 30 to 50 percent of everything your phone burns in a day, according to analysis by SamMobile. Running it at maximum brightness uses two to three times the energy of 50 percent brightness, which shortens your day by 30 to 40 percent. People crank the slider up outside, then never slide it back down when they walk into Walmart.

Turn on auto-brightness and stop managing it yourself. On iPhone it lives under Settings, Accessibility, Display & Text Size, Auto-Brightness. On Android it is Settings, Display, Brightness, with the Adaptive brightness toggle right underneath. The sensor will push it up when you step into the sun and drop it back inside, which is the whole point.

If your phone has an OLED or AMOLED screen, and most phones sold in the last several years do, add dark mode on top. Black pixels on those panels are pixels that are simply off, which a Purdue study found saves about 3 to 9 percent of screen power at typical brightness, and far more at full brightness.

Check Whether Your Refresh Rate Is Stuck At 120Hz

Smooth scrolling has a price, and on older phones it is brutal. PhoneArena’s testing on the Galaxy S20 series found 20 to 36 percent shorter battery life at 120Hz than at 60Hz. The S20 itself went from 12 hours 12 minutes down to 7 hours 45 minutes. The graphics chip is drawing twice as many frames for a screen that is mostly sitting still.

Newer flagships with LTPO displays scale between 1Hz and 120Hz on their own, and the gap against a 60Hz phone shrinks to 5 to 10 percent. Those you can leave alone. The phones worth checking are the 2020 to 2022 models and any handset where the setting got switched to a fixed 120Hz, either at the factory or by somebody poking around in Settings.

Go to Settings, Display, Refresh Rate. On Samsung it is called Motion smoothness. If it says High or 120Hz as a fixed number, move it to Adaptive if that option exists, or Standard if it does not. Adaptive still hits 120Hz when you scroll. It just stops holding the rate on a static page.

Drop To LTE When 5G Is Not Doing Anything For You

Many 5G connections still run as Non-Standalone 5G, which means your phone is holding a 4G connection and a 5G connection at the same time. Two radios instead of one. Redmi’s general manager said in 2020 that 5G phones use about 20 percent more power than 4G models, and a 2023 Ookla analysis of Android phones found 5G users drained 6 to 11 percentage points more battery. Tom’s Guide’s web-browsing test on an iPhone 12 clocked 10 hours 23 minutes on LTE against 8 hours 25 minutes on 5G.

It gets worse at the edge of coverage, where the modem keeps grabbing a 5G signal and losing it. If you work in a building where 5G flickers in and out, that is exactly where you are paying the most for it.

On Android, go to Settings, Network & internet, SIMs, Preferred network type, and pick LTE. On iPhone, Settings, Cellular, Voice & Data, where 5G Auto is a fair compromise since the phone decides when 5G is worth the power. Newer chips are more efficient overall, but Ookla found the 5G gap itself had not closed.

The Small Toggles Nobody Thinks About

Your phone scans for Wi-Fi networks and Bluetooth devices even when both appear to be switched off, because that scanning feeds location accuracy. Shutting it down when you know you will not need it for a while is worth 3 to 4 percent over a day. On Android it lives under Settings, Location, Location services, where Wi-Fi scanning and Bluetooth scanning each get their own toggle.

Quick Share on Samsung phones keeps hunting for nearby devices and incoming transfers using both Wi-Fi and Bluetooth. If you have never once used it, set Who can share with you to No one and flip it back from the Quick Settings panel the day you need it. System vibration is the other quiet one. Every keystroke buzz and menu tap spins a motor, and hundreds of those a day add up to real power.

If your drain started right after a software update rather than gradually, check a lesser-known toggle called Connectivity Assist on iPhone, or Adaptive Connectivity on Android. It switches to cellular data when Wi-Fi is weak, and some users report heavier drain after updating. On iPhone it sits under Settings, Wi-Fi.

Move Battery Saver Up, Then Go Find Your Own Culprit

Pixel phones wait until 20 percent to remind you about Battery Saver. By then you are already rationing, watching the number fall every time you check the clock. Set it to kick in automatically at 30 or 40 percent instead, under Settings, Battery, Battery Saver, Schedule and reminders. It clamps down on background activity, location accuracy and sync frequency, which is the same list of things that drained you in the first place. Extreme Battery Saver is for travel days when there is no outlet anywhere.

Then open the battery usage screen and read it. iPhone: Settings, Battery, scroll to the graph and the app list, and check the activity list for anything running in the background. Android: Settings, Battery, Battery usage, sorted by app. Social apps, streaming apps and anything location-based tend to sit at the top. If one app is eating your day in the background, restrict it or delete it.

Do the location permissions first and the background restrictions second. Those two take ten minutes between them and account for most of what you will get back. Everything else is cleanup. None of it requires a new phone, a new battery, or another power bank from the checkout aisle.

Alex Morgan
Alex Morgan
Alex Morgan is a seasoned writer and lifestyle enthusiast with a passion for unearthing uncommon hacks and insights that make everyday living smoother and more interesting. With a background in journalism and a love for research, Alex's articles provide readers with unexpected tips, tricks, and facts about a wide range of topics.

Latest Articles

More Articles Like This